- Home >
- Products and Solutions >
- Netcom Manufacturing >
- Wi-Fi Products >
- AMB7521
AMB7521
AMB7521
Specification:AMB7521
WiFi Dual-band 2T2R 11ac + Bluetooth V4.1 module
Description
The wireless module complies with IEEE
Features
- ■ Operate at ISM frequency bands (2.4GHz and 5GHz).
- ■ WiFi 2T2R allow data rate supporting 2.4GHz up to 300Mbps / 5GHz up to 867Mbps.
- ■ IEEE standards support: IEEE 11ac/b/g/n Fully qualified Bluetooth 3.0 and Bluetooth 4.1 Dual mode.
- ■ Enterprise level security which can apply WPA/WPA2 certification for WiFi.
- ■ Support sophisticated WiFi/BT coexistence mechanism to enhance collection performance Fully qualified.
- ■ Bluetooth 2.1 + EDR specification including both 2Mbps and 3Mbps modulation mode.
SPECIFICATION
Chipset –RTL8822BU | |
Host Interface-USB | |
Radio | |
Operating | 2.412 - 2.484GHz(Subject to Local Regulations) 5.15 - 5.35 GHz, 5.47 - 5.825 GHz |
Data Rate | 802.11b: 1, 2, 5.5, 11Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: up to 300Mbps 802.11ac: up to 867Mbps |
Modulation | 802.11b: DSSS(DBPSK, DQPSK, CCK) 802.11a/g: OFDM(BPSK, QPSK, 16-QAM, 64-QAM) 802.11n: OFDM(BPSK, QPSK, 16-QAM, 64-QAM) 802.11ac: OFDM(BPSK, QPSK, 16-QAM, 64-QAM,256-QAM) |
More Products
WM5800
Introduction The USB module supports maximum range and speed. This USB module supports higher data rate of up to 150Mbps when connecting with wireless 802.11n device which is 3 times faster than your normally 11g connection. It is for sure the trendiest piece of upgrade you can make to your wireless network. Main Features ■ 1T1R Mode with 150Mbps PHY Rate ■ Complies with IEEE 802.11n and IEEE 802.11 b/g standards ■ Supports WEP 64/128, WPA, WPA2 ■ Supports USB 2.0 interface Hardware Specification Chipset BCM43143 Wireless Lan 1T1R with RX diversity Antenna Designs PIFA antenna Frequency Range 2.412 ~ 2.4835GHz (subject to local regulations) Data Rate 802. 11b: 1, 2, 5.5, 11Mbps802. 11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps802. 11n: up to 150Mbps Power Consumption 3.3V/ 215mA Environmental Requirement Operating Temperature : 0 ℃~50 ℃ ambient temperatureStorage Temperature : -20℃ ~ 70 ℃ ambient temperature PhysicalSpecifications Weight : 2.6gDimension : 35.00 x 16.60 x 10.15 mmCB16C
1. General Description The “CB16C” is a high quality 1.0 Megapixel resolution camera module. It is especially designed for IP CAM、Web Cam. “CB16C” has built-in 10b parallel interface. “CB16C” provides high quality video streaming, transferring up 30 frame rate per second (fps) at HD(720P). 2. Major Features 2.1 10bit Parallel interface support 。10-bit RAW RGB data 。Built-in JPEG encoder to support USB Video Class MJPEG payload 。Built-in H.264 encoder support USB Video Class 2.2 Supported maximum readout 。- HD 720p (1280x720): 30 fps 。- VGA (640x480): 30 fps 。- QVGA (320x240): 30 fps 2.3 Image quality control 。- automatic exposure control (AEC) 。- automatic gain control (AGC) 。- automatic white balance (AWB) 。- automatic black level calibration (ABLC) 3. Key Specifications 3.1 Normal define Specifications Description Module Size (LWH/mm) 45mm × 45mm × 25.2mm(MAX) Temperature (Operation) 0°C to 45°C Focus 1Meter~∞ Types of iris control Fixed iris Resolution 1.0Mp Interface USB Power VCC – (3.3V) IR Illuminators IR LED*8/ effective up to 6 meters 3.2 Sensor Specification Specifications Description Sensor Type SOI_JX-H22 (HD CMOS Image Sensor 1/4” format) Active Array Size 1296x816 Pixel Size 3μm x 3μm Maximum Image Transfer Rate up to 30 fps @720P AGC/AEC/Whiter balance Auto Output Image Formats 10-bit RAW RGB data 3.3Lens Specification Specifications Description Lens Construction 5G+IRF(6E) F/No 1.8 ± 5% EFL 3.3mm ± 5% Maximum FOV 85°± 3° TV Distortion <-12.64% Relative Illumination (Sensor) > 67.6% 4. Platforms Supported Supported Operating Systems Microsoft Windows XP 32bit SP2, Microsoft Windows XP 64bit, Microsoft Windows Vista 32/64 bit, Microsoft Window 7 32/64 bit. For Win7, it’s fully compatible with system built-in h.264 decoder and Linux support UVC after kernel 2.6.26Smart Plug - PLW72 Serial
Description 11ac WiFi Smart Extender Plug gives you wireless control of your home appliances . The Wi‐Fi Extender expands the range, Making use of 802.11AC technology, it not only upgrades your network to the next level but also eliminates dead spots, while offering backward compatibility with 802.11n,802.11g, and 802.11b devices. Optimize your existing WiFi network and extend it to hard‐to‐reach places with the next generation AC WiFi technology. PLW722Mx WiFi Range Extender delivers fast WiFi speed and connectivity for smartphones, tablets, laptops and more – allowing you to enjoy your favorite entertainment throughout your home. Features ■ WiFi 11ac 433Mbps Range Extender ■ Supports new 802.11ac and b/g/n WiFi devices ■ Suitable for all brands of wireless router and AP ■ It is designed with a built-in power adapter. This design allows you to plug it directly into an electrical outlet, ■ Finds best setup location for optimal Wi-Fi coverage with signal strength LED ■ External antennas for better performance. SPECIFICATION Chipset MT7620A + MT7610E Host Interface AC Plug ( US / JP / EU/ UK Type ) FLASH / DDR2 8M / 64MB Radio Antenna 2 PCS of dipole antennas Operating 2.412 ‐ 2.484GHz(Subject to Local Regulations) 5.15 ‐ 5.35 GHz, 5.47 ‐ 5.825 GHz Data Rate 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: up to 300Mbps 802.11ac: up to 433Mbps Modulation 802.11b: DSSS(DBPSK, DQPSK, CCK) 802.11g: OFDM(BPSK, QPSK, 16‐QAM, 64‐QAM) 802.11n: OFDM(BPSK, QPSK, 16‐QAM, 64‐QAM) 802.11ac: OFDM(BPSK, QPSK, 16‐QAM, 64‐QAM,256‐QAM) Transmit Power 802.11b: 16+/‐1.5dBm@11Mbps 802.11gn HT20: 14+/‐1.5dBm@MCS7 802.11gn HT40: 14+/‐1.5dBm@MCS7 802.11an HT20: 13+/‐1.5dBm@MCS7 802.11an HT40: 13+/‐1.5dBm@MCS7 802.11ac HT20: 12+/‐1.5dBm@MCS8 802.11ac HT40: 11+/‐1.5dBm@MCS9 802.11ac HT80: 11+/‐1.5dBm@MCS9 Receive Sensitivity 11n: ≦ ‐65 dBm typical with 20MHz ≦ ‐62 dBm typical with 40MHz 11g: ≦ ‐68 dBm typical @ 54Mbps 11b: ≦ ‐80 dBm typical @ 11Mbp 802.11ac: ‐57dBm+/‐2dBm @HT20 MCS8 802.11ac: ‐54dBm+/‐2dBm @HT40 MCS9 802.11ac: ‐51dBm+/‐2dBm @HT80 MCS9 Power Consumption 6 W The maximum current of outlet PLW72PMA/PLW72PMS : 15A / PLW72PME/PLW72PMK : 13A Environmental Operating 0~400C. 10% to 90% Non‐Condensing Storage ‐30 ~ 700C. 10% to 95% Non‐Condensing Operating Voltage 100~240 V Physical Specification Dimension ( included dipole antennas) PLW72PMA‐US 104.16 (W)* 96.46(D) *60.3(H) +‐0.5 mm PLW72PMS ‐JP 104.16 (W)* 96.46(D) *56.9(H) +‐0.5 mm PLW72PME ‐EU 104.16 (W)*110.96(D) *77.5(H) +‐0.5 mm PLW72PMK ‐UK 104.16 (W)* 96.46(D) *71.8(H)+‐0.5 mmCD16C
1. General Description The “CD16C” is a high quality 1.0 Megapixel resolution camera module. It is especially designed for IP CAM、Web Cam. “CD16C” has built-in 10b parallel interface. “CD16C” provides high quality video streaming, transferring up 30 frame rate per second (fps) at HD(720P). 2. Major Features 2.1 10bit Parallel interface support 。10-bit RAW RGB data 。Built-in JPEG encoder to support USB Video Class MJPEG payload 。Built-in H.264 encoder support USB Video Class 2.2 Supported maximum readout 。- HD 720p (1280x720): 30 fps 。- VGA (640x480): 30 fps 。- QVGA (320x240): 30 fps 2.3 Image quality control 。- automatic exposure control (AEC) 。- automatic gain control (AGC) 。- automatic white balance (AWB) 。- automatic black level calibration (ABLC) 3. Key Specifications 3.1 Normal define Specifications Description Module Size (LWH/mm) 45mm× 45mm × 24.06mm(MAX) Temperature (Operation) 0°Cto 45°C Focus 1.5Meter~∞ Types of iris control Fixed iris Resolution 1.0Mp Interface USB Power 3.3V Minimum Illumination 0.1 Lux 3.2 Sensor Specification Specifications Description Sensor Type SONY_IMX-225 (HD CMOS Image Sensor 1/3” format) Active Array Size 1280x960 Pixel Size 3.75μm x 3.75μm 3.3Lens Specification Specifications Description Lens Construction 6G+IR F/No 2.0 EFL 2.8mm Maximum FOV 101(horizontal) 4. Platforms Supported Supported Operating Systems Microsoft Windows XP 32bit SP2, Microsoft Windows XP 64bit, Microsoft Windows Vista 32/64 bit, Microsoft Window 7 32/64 bit. For Win7, it’s fully compatible with system built-in h.264 decoder and Linux support UVC after kernel 2.6.26CB1522M
Features ■ IP camera and repeater ■ Support SD card slot ■ Remotely control and monitor ■ Support 802.11n/b/g wireless ■ WEP/WPA/WPA2 wireless encryption ■ Easy set-up and support P2P remote access ■ Build in MIC, can monitor audio at remote side SPECIFICATION Networking protocol ■ DHCP client ■ NTP client ■ DDNS client ■ HTTP server Network interfaces ■ 10/100 Base-TX fast Ethernet ■ 802.11n/g/b Wireless, Link rate up to 300Mbps Wireless transmit power/sensitivity ■ 11n TX Power: 13dBm ■ 11n RX sensitivity: -61dBm at HT40 Wireless data rate ■ 11n: up to 300Mbps ■ 11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps ■ 11b: 1, 2, 5,5, 11Mbps Supported maximum readout ■ HD (1280x720): 30fps ■ VGA (640x480): 15 fps ■ QVGA (320x240): 30 fps ■ QVGA (320x240): 15 fps Focal Length f = 3 mm Aperture F 1.8 Video codecs H.264 encoder Operating Systems IOS 5 and Android 4.0 upward APPs IR distance 10meters 5A Image quality control ■ Automatic exposure control (AEC) ■ Automatic gain control (AGC) ■ Automatic white balance (AWB) ■ Automatic band filter (ABF) ■ Automatic black level calibration (ABLC) Sensor HD CMOS Image Sensor 1/4” Lens Type Fixed-focal Resolution 1.0Mp Maximum FOV (Field of View) ■ 85.4°(diagonal) ■ 43.4°(vertical) ■ 70.6° (horizontal) Minimum Illumination ■ 2 Lux, F1.8(Color) ■ 0.1 Lux,F1.8(B/W) IR Illuminators Built-in IR LED Power requirement DC 5V/1A Flash Memory/SDRAM 8MB/64MB Dimensions 101.9(L)/76.9(W)/48.9(H)mm Operating temperature 0°C to 40°C Storage temperature -20°C to 70°C Weight Around 103g(W/O stand) Certifications CE/FCC/NCCPLW52 serial
WiFi Smart Extender Plug gives you wireless control of your home appliances and electronics, scheduling power ON/OFF control by internal Relay. The Wi-Fi Extender expands the range of any 802.11b/g/n wireless network by repeating the signal from a wireless router and redistributing it in a new "extended" Features ■ WiFi 11n/b/g 300Mbps Range Extender. ■ Smart phone Apps (Android) access and track energy usage. ■ Energy management monitoring (kw/h). ■ Web application provides remote access. Smart plug is Secured & easy Set up. ■ Zero-Crossing cut (Cut off the relay at the point of zero-crossing). ■ 16AOver current protection (Cut-off the relay when the current is over the threshold). SPECIFICATION Chipset MT7620A Host Interface AC Plug ( UK / EU / US Type ) FLASH 8 Mb DDR2 64Mb Radio Antenna 2 PCS of chip antennas Operating 2.412 - 2.484GHz(Subject to Local Regulations) Data Rate 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: up to 300Mbps Modulation 802.11b: DSSS(DBPSK, DQPSK, CCK) 802.11g: OFDM(BPSK, QPSK, 16-QAM, 64-QAM) 802.11n: OFDM(BPSK, QPSK, 16-QAM, 64-QAM) Transmit Power 802.11b: 17+/-1.5dBm@11Mbps 802.11gn HT20: 14+/-1.5dBm@MCS7 802.11gn HT40: 14+/-1.5dBm@MCS7 802.11n HT20: 14+/-1.5dBm@MCS7 802.11n HT20: 14+/-1.5dBm@MCS7 Receive Sensitivity 11n: ≦-70 dBm typical with 20MHz ≦-68 dBm typical with 40MHz 11g: ≦-73 dBm typical @ 54Mbps 11b: ≦-84 dBm typical @ 11Mbp Power Consumption 3W Environmental Operating 0~400C. 10% to 90% Non-Condensing Storage -30 ~ 700C. 10% to 95% Non-Condensing Operating Voltage 110~220 V Physical Specification Dimension ( included AC plug) UK Type 58.9(W)*94.5(D) *71.8(H)+-0.2 mm EU Type 58.9(W)*94.5(D) *77.5(H)+-0.2 mm US Type 58.9(W)*94.5(D) *56.9(H)+-0.2 mmAU7520
The AU7520 AC dongle delivers next generation WiFi speeds and enables multiple HD video streams throughput your home simultaneously. It is compatible with next generation WiFi devices and backward compatible with 802.11 b/g/n +AC devices. With up to 300/867 Mbps speed and dual band technology, it is easy to use with both laptops and desktops. Moreover, the Dual Band reduces interference for enhanced connections to more WiFi devices. The AU7520 AC dongle is ideal for upgrading your exiting laptop or desktop to 802.11ac. ■ 802.11ac MIMO solution for 5G band. ■ Complete 802.11n MIMO solution for 2.4GHz and 5GHz band. ■ 2*2 MIMO technology foe extended receiption robustness and exceptional throughput. ■ Maximum PHY data rate up to 173.3Mbps using 20MHz bandwidth, 400Mbps using 40MHz bandwidth and 866.7Mbps using 80MHz bandwidth. ■ Backward compatible with 802.11a/b/g devices while opreating at 802.11n data rates. ■ Backward compatible with 802.11a/n devices while opreating at 802.11ac data rates. ■ IEEE802.11a/b/g/n/ac Draft 2.0 compatible WLAN. ■ IEEE802.11e QoS Enhancement(WMM). ■ IEEE802.11i(WPA,WPA2). Open, shared key,and pair-wise key authentication services. ■ IEEE802.11h TPC, Spectrum Measurement. ■ IEEE802.11k (Wireless Authentication Privacy Infrastructure) certified.